manualshive.com logo in svg

Auerswald COMfortel 1100, Operation And Configuration Instructions, Page: 17 / 273

Share
Download
Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 17

COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10

17

Important Information
Environmental Notice

Environmental Notice

If your Auerswald device is taken out of use, please make sure that it is properly disposed of 
(must not be disposed of with normal household waste).

For the sake of environmental protection, please make sure that packaging 
materials are also properly disposed of.

Please consult your municipal administration authorities for options of 
proper and environmentally safe disposal of the device. If you want us to 
take over the disposal, please send the device to us.Shipment which is not 
prepaid cannot be accepted.

Batteries and accumulators have to be discharged completely before 
disposal (empty/voltage-free). Batteries have to be handed in at the 
collection point for old batteries.

Summary of Contents for COMfortel 1100


















































































































































































































































































Reviews:

No comments