manualshive.com logo in svg

Auerswald COMfortel 1100, Operation And Configuration Instructions, Page: 38 / 273

Share
Download
Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 38

38

COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10

Using the Configuration Software COMfortel Set
Help
Opening the Help Topic-Relevantly

Help

Via the help you can access the entire operation and configuration instruction for the system 
telephone.

Opening the Help Topic-Relevantly

Below the directory tree, there is a window containing links to several help topics. The offered 
help topics refer to the currently open configuration page.

• Click the link to go to the desired help topic.

The corresponding help page opens. You can navigate back and forward within the 
selected topic by clicking the 

 and 

 icons.

• Press the key F1.

The help opens and displays the description of the configuration software.

Note: You can always access the entire operating and configuration instruc-
tions for the system telephone via the navigation.

Navigating in the Help Window

There are several ways to navigate through the help.

Navigating via the Table of Contents

Click the Table of Contents (this text is dependent on the operating system used) tab to go to 
the table of contents (the tab is highlighted in yellow)

The table of contents will be displayed on the left-hand side of the help window as a directory 
tree.

Summary of Contents for COMfortel 1100


















































































































































































































































































Reviews:

No comments