208
COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10
Configuring and Operating Functions
Targeted Exchange Line Access
Configuring and Operating Function Key for Targeted Exchange Line Access (A)
Exception: In case of direct exchange access you do not have to dial an exchange line access
number.
In addition, when the function is defined on the first key level, the status of the S
0
port/bundle
is indicated by the corresponding LED.
The configuration can be carried out as follows:
• Via COMfortel Set
Configuring Function Key for Targeted Exchange Line Access (A) via COMfortel Set
Requirements:
– An open configuration and the required PIN, if necessary
1.
Open the page Function keys > Assign function keys.
2.
Click one of the following tabs:
3.
Right-click the function key you want to assign.
A function selection dialogue opens.
4.
Select the Exchange line function.
The current settings for defining the key are displayed.
5.
In the Telephone no entry field, enter the external telephone number for the PBX that
you want to transfer during targeted exchange line access.
LED signalling next to the key:
Red
All of the B-channels on the S
0
port/bundle are in use.
Yellow
At least one B-channel on the S
0
port/bundle is available. Press the key to
allocate the line still available.
Off
S
0
port/bundle is available. Press the key to allocate one of the available lines.
Level 1: Keys are defined on the first key level.
Level 2: Keys are defined on the second key level.
Up to 24 digits
Digits and the characters * and #
Summary of Contents for COMfortel 1100
Page 273: ...04 11 10...
