manualshive.com logo in svg

Auerswald COMfortel 1100, Operation And Configuration Instructions, Page: 93 / 273

Share
Download
Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 93

COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10

93

Telephone Book and Telephone Number Lists
Caller List
Configuring the LED Message Key

Configuring the LED Message Key

While in the idle state, the LED above the message key indicates the state of the list/s available 
over the message key.

• LED is flashing: The list contains new entries that have not yet been viewed.

• LED lights up: There are no new entries. All of the entries in the list have been viewed, but 

have not yet been deleted.

If the LED signalling is disruptive or bothersome, it can be switched off.

The configuration can be carried out as follows:

• Via COMfortel Set

Configuring LED Message Key via COMfortel Set

Requirements:
– An open configuration and the required PIN, if necessary

1.

Open the page Settings/functions > Signalling/ringer.

2.

In the Message LED list field, select one of the following options:

Further steps:
– Save your configuration before closing.

Flashing/always on: Switches on LED signalling.

Flashing/off: Switches on LED signalling only for new entries that have not yet 
been viewed.

Always off: Switches off LED signalling. 

Summary of Contents for COMfortel 1100


















































































































































































































































































Reviews:

No comments