138
COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10
Configuring and Operating Functions
Call Forwarding
Configuring and Operating Function Key for Call Forwarding for External Numbers
Further steps:
– Save your configuration before closing.
Requirements for operating the function:
– Authorization assigned in the PBX for Configuring CF (sub) to ext. number
Configuring Function Key for Switching Call Forwarding for External Numbers Off via
COMfortel Set
Requirements:
– An open configuration and the required PIN, if necessary
1.
Open the page Function keys > Assign function keys.
2.
Click one of the following tabs:
3.
Right-click the function key you want to assign.
A function selection dialogue opens.
4.
Select the Switch off all CF (MSN/DDI) function.
The current settings for defining the key are displayed.
5.
In the Key name entry field, enter a name for the key. The following entries are
possible:
Clicking
automatically enters the default name in the entry field.
Note: The key name is used for printing the label.
Further steps:
– Save your configuration before closing.
Requirements for operating the function:
– Authorization assigned in the PBX for Configuring CF (sub) to ext. number
Level 1: Keys are defined on the first key level.
Level 2: Keys are defined on the second key level.
Up to 16 digits
Digits and characters
Summary of Contents for COMfortel 1100
Page 273: ...04 11 10...