manualshive.com logo in svg

Auerswald COMfortel 1100, Operation And Configuration Instructions, Page: 121 / 273

Share
Download
Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 121

COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10

121

Configuring and Operating Functions
Automatic Call Acceptance
Configuring Call Acceptance Time for Automatic Call Acceptance

Switching Attention Tone for Automatic Call Acceptance On/Off via COMfortel Set

Requirements:
– An open configuration and the required PIN, if necessary

1.

Open the page Settings/functions > Headset.

2.

Select or clear the Attention tone for automatic call acceptance check box.

Further steps:
– Save your configuration before closing.

Configuring Call Acceptance Time for Automatic Call Acceptance

The call acceptance time for automatic call acceptance indicates after how many seconds an 
incoming call is automatically accepted.

The configuration can be made as follows:

• Via COMfortel Set

Configuring Call Acceptance Time for Automatic Call Acceptance via COMfortel Set

Requirements:
– An open configuration and the required PIN, if necessary

1.

Open the page Settings/functions > Headset.

2.

Enter a value in the Call acceptance time (0-30 secs) for automatic call 
acceptance entry field. The following entries are possible:

Further steps:
– Save your configuration before closing.

Enables the attention tone for automatic call acceptance.

Disables the attention tone for automatic call acceptance.

0 to 30: After 0 to 30 minutes, an incoming call is automatically accepted, 
depending on the entry.

Summary of Contents for COMfortel 1100


















































































































































































































































































Reviews:

No comments