manualshive.com logo in svg

Auerswald COMfortel 1100, Operation And Configuration Instructions, Page: 190 / 273

Share
Download
Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 190

190

COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10

Configuring and Operating Functions
Power Save Mode
Switching Power Save Mode Activation On/Off Depending on Configuration

Switching Power Save Mode Activation On/Off Depending on Configuration

If configuration-dependent power save mode activation is enabled, the telephone goes into 
power save mode during a switchover into a specific PBX configuration (for example, a night 
configuration).

Switching this on/off can be done as follows:

• Via COMfortel Set

Switching Configuration-dependent Activation of Power Save Mode On/Off via 
COMfortel Set

Requirements:
– An open configuration and the required PIN, if necessary

1.

Open the page Settings/functions > Power save mode.

2.

Make the necessary changes depending on the type of PBX.

• In the Configuration entry field, select a configuration in order to enable the confi-

guration-dependent activation of power save mode.

• In the Configuration (10 to 9999) entry field, enter the identification number of a 

configuration in order to enable the configuration-dependent activation of power 
save mode.

Note: To disable the configuration-dependent activation of power save mode, 
you need to select --- in the list field or delete the identification number of the 
configuration from the entry field.

Further steps:
– Save your configuration before closing.

Summary of Contents for COMfortel 1100


















































































































































































































































































Reviews:

No comments