54
COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10
Telephoning
Outgoing Calls
Dialling Telephone Number on Direct Exchange Line Access
Dialling Telephone Number on Direct Exchange Line Access
Requirements:
– Knowledge of the telephone and its menu options
– Telephone is configured as a direct exchange access point via the PBX
In order to dial an external telephone number on a direct exchange line access point, pick up
the receiver and enter the external telephone number without the exchange line access
number.
In order to carry out other types of calls (for example, internal or short-code), proceed as
described in the following.
1.
Pick up the receiver or press the hook key.
You will hear the external dial tone.
2.
Select internal.
You will hear the internal dial tone.
3.
Dial an internal telephone number.
Once you have finished dialling the telephone number, the subscriber is called.
Note: If you would like to use dial preparation or, for example, configure a
speed dialling key, you must press the star key twice beforehand for internal
and short-code calls.
Options for Unsuccessful Calls
The following options are available for unsuccessful call:
Initiating Callback on Busy
If you cannot get through to a busy subscriber despite repeated attempts, you can initiate a
callback on busy. The PBX supports the service attribute "Automatic callback on busy (CCBS)".
This service attribute is required for an external call.
Summary of Contents for COMfortel 1100
Page 273: ...04 11 10...