manualshive.com logo in svg

Auerswald COMfortel 1100, Operation And Configuration Instructions, Page: 149 / 273

Share
Download
Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 149

COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10

149

Configuring and Operating Functions
Door Functions
Configuring and Operating Function Key for Door Functions

Door Functions

A door terminal system connected with the interface FTZ 123 D12-0 (PBX requires extension 
module) enables the following functions. Calls to the door can be made from any telephone 
(intercom). During a call to the door, the door can be opened (open door) and a stairwell light 
controlled by switching a relay (switch on light).

These functions can be executed on the system telephone without initiating a door call.

Configuring and Operating Function Key for Door Functions

Important: Not available for operation on the PBXs COMpact 2204 USB and 
COMpact 3000.

Press the key to initiate a call connection with the door (after picking up the receiver) or to switch 
on the door opener and/or light.

In addition, when functions are defined on the first key level, the status of the function is 
indicated by the corresponding LED.

The configuration can be carried out as follows:

• Via COMfortel Set

Configuring Function Key for Defined Door Terminal Functions via COMfortel Set

Requirements:
– An open configuration and the required PIN, if necessary
– The authority level assigned in the PBX for the door terminal
– The relays configured in the PBX for the intercom, opening the door and the stairwell light

LED signalling next to the key:

Green

The door opener function is enabled.

Red

A call connection has been established with the door.

Yellow

The light is switched on.

Off

None of the functions configured on the key are enabled.

Summary of Contents for COMfortel 1100


















































































































































































































































































Reviews:

No comments