manualshive.com logo in svg

Auerswald COMfortel 1100, Operation And Configuration Instructions, Page: 219 / 273

Share
Download
Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 219

COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10

219

Configuring and Operating Functions
Text before Answering
Switching Text before Answering for External Telephone Number On/Off

Switching Text before Answering for External Telephone Number On/Off

Important: This function is only available for operation on the PBXs 
COMpact 4406 DSL, COMpact 4410 USB and COMmander Basic.

Requirements:
– Function key configured for the text before answering function
– Text before answering announcement saved on the PBX

• Press the function key configured for the text before answering function.

Configuring and Operating Function Key for Text before Answering for External 
Telephone Number

Important: This function is only available for operation on the PBXs 
COMpact 4406 DSL, COMpact 4410 USB and COMmander Basic.

Press the key while the telephone is the idle state to switch text before answering for the confi-
gured telephone number on or off or to switch it over.

In addition, when functions are defined on the first key level, the status of the function is 
indicated by the corresponding LED.

The configuration can be carried out as follows:

• Via COMfortel Set

LED signalling next to the key:

Green

The text before answering function for the configured telephone number is 
enabled.

Off

The text before answering function for the configured telephone number is 
disabled.

Summary of Contents for COMfortel 1100


















































































































































































































































































Reviews:

No comments