172
COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10
Configuring and Operating Functions
InterCom Announcement/Handsfree
Configuring and Operating Function Key for InterCom Handsfree
Configuring and Operating Function Key for InterCom Handsfree
Press the key while the telephone is in the idle state to dial the phone number assigned to the
key and initiate InterCom handsfree. Depending on the kind of action configured, you need to
hold the key during handsfree operation (as soon as you release the key again, the connection
is terminated) or switch the key over by briefly pressing the key (the key is pressed once at the
start and once at the end).
In addition, when InterCom destination is defined on the first key level, the status of the
InterCom destination connection is indicated by the corresponding LED.
The configuration can be carried out as follows:
• Via COMfortel Set
Configuring Function Key for InterCom Handsfree via COMfortel Set
Requirements:
– An open configuration and the required PIN, if necessary
1.
Open the page Function keys > Assign function keys.
2.
Click one of the following tabs:
3.
Right-click the function key you want to assign.
A function selection dialogue opens.
4.
Select the InterCom handsfree function.
The current settings for defining the key are displayed.
5.
In the Telephone no entry field, enter the destination number.
LED signalling next to the key:
Green
There is currently an active connection to the InterCom destination.
Off
There is currently no active connection to the InterCom destination.
Level 1: Keys are defined on the first key level.
Level 2: Keys are defined on the second key level.
Summary of Contents for COMfortel 1100
Page 273: ...04 11 10...