180
COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10
Configuring and Operating Functions
Macro
Configuring and Operating Function Key for Macro
5.
In the Macro sign entry field, enter the macro. The following entries are possible:
Note:
If you would like to configure a programming function on the PBX as a
macro, enter a pause between the password and programming code
sequence.
Pauses cannot be entered at the beginning of a macro.
The maximum pause time is 5 seconds. This restriction does not apply for
the C command (waiting for a connection).
LED control commands are only possible on the first level. Exception: If
there is a macro on both levels of a function key, LED control is also
performed by the macro on the second level. This makes it possible, for
instance, to use the macro to switch the LED on on the one key level and to
use the macro to switch LED off on the other key level. This allows the
switching status of a simultaneously switched function to be read on the
LED.
6.
In the Key name entry field, enter a name for the key. The following entries are
possible:
Clicking
automatically enters the default name in the entry field.
Up to 100 characters for a max. of 10 keys, up to 40 characters for additional
keys
The commands listed at the end:
Z [digit sequence]: Digit sequence selection including * and #
W [digits 1-5]: Waiting time/pause time of 1-5 seconds
K: Switchover to keypad
M: Switchover to DTMF
H: Hang-up/pick-up with the hook key
C: Wait for a connection
Lo: The LED next to the function key switches off
Lr: The LED next to the function key switches on (red)
Ly: The LED next to the function key switches on (yellow)
Lg: The LED next to the function key switches on (green)
Up to 16 digits
Digits and characters
Summary of Contents for COMfortel 1100
Page 273: ...04 11 10...