Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 157

Page: 157 / 273

COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10

157

Configuring and Operating Functions
Group Functions
Configuring and Operating Function Key for Logging Out of All Groups

In the Key name entry field, enter a name for the key. The following entries are
possible:

Clicking

automatically enters the default name in the entry field.

Note: The key name is used for printing the label and for display.

Further steps:
– Save your configuration before closing.

Requirements for operating the function:
– Authorisation in the PBX for Controlling of the PBX via telephone

Configuring and Operating Function Key for Logging Out of All Groups

Press the key while the telephone is in the idle state to log the telephone out of all groups.

The configuration can be carried out as follows:

• Via COMfortel Set

outgoing: Select the type of call for outgoing.

i outbound: Select the type of call for i outbound.

Up to 16 digits

Digits and characters

LED signalling next to the key:

None

Summary of Contents for COMfortel 1100


















































































































































































































































































Search results

Summary of Contents for COMfortel 1100

Reviews:

Auerswald COMfortel 1100, Operation And Configuration Instructions, Page: 157 / 273

Search results

Summary of Contents for COMfortel 1100

Reviews: