manualshive.com logo in svg

Auerswald COMfortel 1100, Operation And Configuration Instructions, Page: 215 / 273

Share
Download
Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 215

COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10

215

Configuring and Operating Functions
Targeted VoIP Access Point
Configuring and Operating Function Key for Targeted VoIP Access Point

A function selection dialogue opens.

4.

Select the VoIP account function.

The current settings for defining the key are displayed.

5.

In the Telephone no entry field, enter the account number for the VoIP account.

Exception: For a direct exchange line access device, enter the account number star-
ting with two leading asterisks (**account number).

6.

In the Key name entry field, enter a name for the key. The following entries are 
possible:

Clicking 

 automatically enters the default name in the entry field.

Note: The key name is used for printing the label and for display.

Further steps:
– Save your configuration before closing.

Up to 16 digits

Digits and characters

Summary of Contents for COMfortel 1100


















































































































































































































































































Reviews:

No comments