manualshive.com logo in svg

Auerswald COMfortel 1100, Operation And Configuration Instructions, Page: 227 / 273

Share
Download
Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 227

COMfortel Set V2.7 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10

227

Configuring and Managing Voice Mailboxes
Readiness
Configuring and Operating the Function Key for Readiness

Readiness

To enable the voice mailbox to accept calls and record messages, readiness must be enabled.

Configuring and Operating the Function Key for Readiness

Press the defined and assigned key to switch a previously defined voice mailbox on or off or 
switch it over.

In addition, when functions are assigned on the first key level, the status of the function is 
indicated by the corresponding LED.

The configuration can be carried out as follows:

• Via COMfortel Set

Configuring the Function Key for Readiness (defined) via COMfortel Set

Requirements:

– COMmander Business or COMmander Basic.2 with inserted COMmander VMF module, 

COMpact 5010 VoIP with inserted COMpact 2VoIP module, or COMpact 5020 VoIP with 
inserted COMpact 2VoIP or 6VoIP module

– Voice mailbox which is configured in the PBX and assigned to it

– An open configuration and knowledge of the required PIN, if necessary

1.

Open the page function keys > assign function keys.

2.

Click one of the following tabs:

3.

Right-click the function key you want to assign.

A function selection dialog opens.

LED signalling next to the key:

Green

Readiness is enabled.

Off

Readiness is disabled.

Level 1: Keys are assigned on the first key level.

Level 2: Keys are assigned on the second key level.

Summary of Contents for COMfortel 1100


















































































































































































































































































Reviews:

No comments