COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10
167
Configuring and Operating Functions
InterCom Announcement/Handsfree
InterCom Announcement Procedure
InterCom Announcement/Handsfree
The InterCom function enables an announcement to one system telephone or to all system
telephones of a group from any internal telephone without someone having to actively receive
a call (for example, in a doctor's office).
If the InterCom destination is one system telephone, this can be programmed to switch on the
microphone in addition to the loudspeaker (handsfree) so that a person nearby can speak with
the caller using this intercom system.
InterCom Announcement Procedure
InterCom announcement is carried out as follows:
• Depending on the InterCom destination, one system telephone or all system of a group are
called using the InterCom function.
Note: Only the system telephones of the group which are ready for calls (e.g.,
not busy) are called. The individual group members need not to be logged
into the group. They are also called when they are logged out of the group.
• After a few rings, either one system telephone or all system telephones of the group
automatically pick up the call, depending on the InterCom destination.
• Announcement is executed.
Note: Announcement is limited to 120 seconds due to security reasons in
order to prevent possible misuse of this function (for example, eavesdropping
from remote rooms).
• After 120 seconds has elapsed, the connection is automatically interrupted. The connection
can be maintained if the InterCom destination is one system telephone and the receiver is
picked up before 120 seconds has elapsed.
Summary of Contents for COMfortel 1100
Page 273: ...04 11 10...