174
COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10
Configuring and Operating Functions
InterCom Announcement/Handsfree
Configuring and Operating Function Key for InterCom Permission
Configuring Function Key for InterCom Permission via COMfortel Set
Requirements:
– An open configuration and the required PIN, if necessary
1.
Open the page Function keys > Assign function keys.
2.
Click one of the following tabs:
3.
Right-click the function key you want to assign.
A function selection dialogue opens.
4.
Select the InterCom permission function.
The current settings for defining the key are displayed.
5.
In the Kind of switching list field, select one of the following options:
6.
In the Key name entry field, enter a name for the key. The following entries are
possible:
Clicking
automatically enters the default name in the entry field.
Note: The key name is used for printing the label.
Further steps:
– Save your configuration before closing.
Requirements for operating the function:
– Authorisation in the PBX for Controlling of the PBX via telephone
Level 1: Keys are defined on the first key level.
Level 2: Keys are defined on the second key level.
switch off: Pressing the key disables InterCom permission.
switch on: Pressing the key enables InterCom permission.
switch over: Pressing the key switches InterCom permission over.
Up to 16 digits
Digits and characters
Summary of Contents for COMfortel 1100
Page 273: ...04 11 10...