116
COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10
Configuring and Managing the Telephone
Function Keys
Configuring and Operating Function Key for Shift
Configuring and Operating Function Key for Shift
Press the key to access the second key level for a few seconds.
In addition the status of the function is indicated by the corresponding LED.
The configuration can be carried out as follows:
• Via COMfortel Set
Configuring Function Key for Shift via COMfortel Set
Requirements:
– An open configuration and the required PIN, if necessary
1.
Open the page Function keys > Assign function keys.
2.
Click Level 1.
Important: Configuring this function is only possible on the first level. The
second level is then blocked. If a function has been assigned to the second
level, it is deleted.
3.
Right-click the function key you want to assign.
A function selection dialogue opens.
4.
Select the Shift function.
The current settings for defining the key are displayed.
5.
In the Key name entry field, enter a name for the key. The following entries are
possible:
LED signalling next to the key:
Red
The second key level is accessible.
Off
The first key level is accessible.
Up to 16 digits
Digits and characters
Summary of Contents for COMfortel 1100
Page 273: ...04 11 10...