manualshive.com logo in svg

Auerswald COMfortel 1100, Operation And Configuration Instructions, Page: 113 / 273

Share
Download
Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 113

COMfortel 1100 -  COMfortel Set V2.7 -  COMfortel Set V2.7 - Version of the Manual 04 11/10

113

Configuring and Managing the Telephone
Headset
Switching Headset Ringing On/Off

5.

In the Kind of switching list field, select one of the following options:

6.

In the Key name entry field, enter a name for the key. The following entries are 
possible:

Clicking 

 automatically enters the default name in the entry field.

Note: The key name is used for printing the label.

Further steps:
– Save your configuration before closing.

Switching Headset Ringing On/Off

During headset operation (headset switched on), three types of call signalling are possible:

1. Ringing through the loud speaker (as for receiver operation)

2. Ringing through the loud s a short attention tone on the headset

3. Short attention tone on the headset

For the second and third operating mode, headset ringing must be switched on as described 
here. For the third operating mode, the ringer must also be switched off.

Switching this on/off can be done as follows:

• Via COMfortel Set

switch off: Enables headset operation.

switch on: Enables headset operation.

switch over: Pressing the key switches headset operation on and off.

Up to 16 digits

Digits and characters

Summary of Contents for COMfortel 1100


















































































































































































































































































Reviews:

No comments