manualshive.com logo in svg

Auerswald COMfortel 1100, Operation And Configuration Instructions, Page: 212 / 273

Share
Download
Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 212

212

COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10

Configuring and Operating Functions
Targeted Exchange Line Access
Configuring and Operating Function Key for Targeted Exchange Line Access (C)

5.

In the Telephone no entry field, enter the external telephone number for the PBX that 
you want to transfer during targeted exchange line access.

6.

In the Key name entry field, enter a name for the key. The following entries are 
possible:

Clicking 

 automatically enters the default name in the entry field.

Note: The key name is used for printing the label and for display.

Further steps:
– Save your configuration before closing.

Up to 24 digits

Digits and the characters * and #

Up to 16 digits

Digits and characters

Summary of Contents for COMfortel 1100


















































































































































































































































































Reviews:

No comments