manualshive.com logo in svg

Auerswald COMfortel 1100, Operation And Configuration Instructions, Page: 234 / 273

Share
Download
Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 234

234

COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10

Configuring and Managing Voice Mailboxes
Message Forwarding
Configuring and Operating the Function Key for Message Forwarding

Message Forwarding

Message forwarding enables the voice mailbox to notify you of new messages even if you are 
out and about.

Configuring and Operating the Function Key for Message Forwarding

Press the defined and assigned key to switch message forwarding for a defined voice mailbox 
on or off or switch it over.

In addition, when functions are assigned on the first key level, the status of the function is 
indicated by the corresponding LED.

The configuration can be carried out as follows:

• Via COMfortel Set

Configuring the Function Key for Defined Message Forwarding via COMfortel Set

Requirements:

– COMmander Business or COMmander Basic.2 with inserted COMmander VMF module, 

COMpact 5010 VoIP with inserted COMpact 2VoIP module, or COMpact 5020 VoIP with 
inserted COMpact 2VoIP or 6VoIP module

– An open configuration and knowledge of the required PIN, if necessary

– Voice mailbox which is configured in the PBX and assigned to it

– The destination for message forwarding of the voice mailbox configured in the PBX

1.

Open the page function keys > assign function keys.

2.

Click one of the following tabs:

3.

Right-click the function key you want to assign.

LED signalling next to the key:

Green

Message forwarding of the voice mailbox is enabled.

Off

Message forwarding of the voice mailbox is disabled.

Level 1: Keys are assigned on the first key level.

Level 2: Keys are assigned on the second key level.

Summary of Contents for COMfortel 1100


















































































































































































































































































Reviews:

No comments