manualshive.com logo in svg

Auerswald COMfortel 1100, Operation And Configuration Instructions, Page: 145 / 273

Share
Download
Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 145

COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10

145

Configuring and Operating Functions
Configuration Switchover
Configuring and Operating Function Key for Configuration Switchover

4.

Select the Defined config. on function.

The current settings for defining the key are displayed.

5.

Configure the settings dependent on the type of PBX.

• Select a configuration in the configuration to be activated list field.

• Enter the identification number of the configuration in the identification number 

field.

6.

In the Key name entry field, enter a name for the key. The following entries are 
possible:

Clicking 

 automatically enters the default name in the entry field.

Note: The key name is used for printing the label and for display.

Further steps:
– Save your configuration before closing.

Requirements for operating the function:
– Authorization in the PBX for Configuration switching

Up to 16 digits

Digits and characters

Summary of Contents for COMfortel 1100


















































































































































































































































































Reviews:

No comments