COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10
67
Telephoning
Transfer
Placing External Communication Partner in Waiting Loop
Note: In order to carry out an open query call, dial the internal basis
telephone park position and hang up, instead of dialling the internal
telephone number (see also the PBX manual). To make this operation more
convenient, you can save the internal basis telephone park position
on one or more freely programmable function keys (speed dialling key). The
LEDs for the speed dialling keys then indicate whether a park position is
available or busy.
Placing External Communication Partner in Waiting Loop
Requirements:
– Knowledge of the telephone and its menu options
– Internal transfer destination
If the internal telephone to which you are trying to transfer a call is busy, proceed as described
in the following.
1.
Select waiting loop.
2.
Press the
softkey.
3.
Hang up the receiver.
The external communication partner continues to listen to hold music.
As soon as the internal subscriber hangs up the receiver, this external communication
partner is called. Once he accepts the call, he is connected with the subscriber in the
waiting loop.
Note:
If the internal subscriber does not answer the call within 60 seconds, or the
line remains busy during the three minute waiting time, the call will be trans-
ferred back to you.
If you pick up the receiver, you will be reconnected with the external commu-
nication partner. You can then place him in the waiting loop again. If you do
not pick up the call within 60 seconds, the exchange line connection is
disconnected completely (for example, if your line was busy even for a short
time).
Summary of Contents for COMfortel 1100
Page 273: ...04 11 10...