COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10
31
Using the Configuration Software COMfortel Set
Configuration Software COMfortel Set
Opening Configuration
Opening Configuration
You can open the configuration of the telephone or a configuration file saved on the hard disk.
Opening the Telephone Configuration
Requirements:
– An existing PC connection configured correctly in COMfortel Set to a PC interface on the
PBX or another connected system telephone
– MSN configured for the system telephone
– Knowledge of the required PIN
1.
Open the menu File > Open.
2.
Click Telephone.
The Connection routes dialogue with the devices connected via the interface confi-
gured above opens.
3.
Select the telephone whose configuration you would like to open and click OK.
The PIN entry dialogue opens.
Note: For operation on the PBXs COMpact 3000, COMpact 5010 VoIP,
COMpact 5020 VoIP, COMmander Basic.2 and COMmander Business,
access to the telephone is only possible via the 6-digit PIN assigned in the
PBX. In this case, you need to first select which PIN you would like to enter
based on the authority level: the Admin PIN, one of the subadmin PINs or the
user PIN that belongs to the telephone.
4.
Enter the associated PIN and click OK.
The configuration is loaded from the telephone. This may take a while.
Opening a Configuration File
Requirements:
– Configuration file (*.cf2) saved on the hard disk
In order to open one of the files previously saved with this program, open the menu File >
Related files and select the file.
Summary of Contents for COMfortel 1100
Page 273: ...04 11 10...