manualshive.com logo in svg

Auerswald COMfortel 1100, Operation And Configuration Instructions, Page: 235 / 273

Share
Download
Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 235

COMfortel Set V2.7 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10

235

Configuring and Managing Voice Mailboxes
Message Forwarding
Configuring and Operating the Function Key for Message Forwarding

A function selection dialog opens.

4.

Select the voice mailbox - message forwarding defined function.

The current settings for assigning the key are displayed.

5.

In the Number entry field, enter the number of the voice mailbox which is to be 
switched via the function key.

6.

In the kind of switching list field, select one of the following options:

7.

In the key name entry field, enter a name for the key. The following entries are 
possible:

Clicking 

 automatically enters the default name in the entry field.

Note: The key name is used for printing the label.

Further steps:
– Save your configuration before closing.

switch off: Press the key to disable message forwarding.

switch on: Press the key to enable message forwarding.

switch over: Press the key to switch message forwarding on and off.

Up to 16 digits

Digits and characters

Summary of Contents for COMfortel 1100


















































































































































































































































































Reviews:

No comments