manualshive.com logo in svg

Auerswald COMfortel 1100, Operation And Configuration Instructions, Page: 223 / 273

Share
Download
Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 223

COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10

223

Configuring and Operating Functions
Voicemail Center 461/461.2
Switching Rapid Remote Access of Voicemail Centers 461.2 On/Off

When selecting Global mailbox, you need to use the remote access code 
entered at the following location: In the Voicemail Center 461.2 under 
settings > remote access > remote access code or in the Voicemail 
Center 461 under settings > remote access code.

9.

In the Key name entry field, enter a name for the key. The following entries are 
possible:

Clicking 

 automatically enters the default name in the entry field.

Note: The key name is used for printing the label and for display.

Further steps:
– Save your configuration before closing.

Switching Rapid Remote Access of Voicemail Centers 461.2 On/Off

Compared to the Voicemail Center 461, the Voicemail Center 461.2 with firmware version 2.02 
and higher supports more rapid remote access over the telephone. If you would like to take 
advantage of this, update the firmware for the existing Voicemail Center 461.2 and enable rapid 
remote access on the telephone.

Note: If you would also like to use the telephone to operate the Voicemail 
Center 461, disable rapid remote access to prevent making mistakes when 
accessing the device.

Switching this on/off can be done as follows:

• Via COMfortel Set

Up to 16 digits

Digits and characters

Summary of Contents for COMfortel 1100


















































































































































































































































































Reviews:

No comments