Ametek Sorensen ASA Series, Operation Manual

Page: 30 / 166

Asterion DC Multioutput ASA Series Operational Manual
M330516-01 1-12
Inrush Current,
typical
(8)
Input Option “C”: 3 phase, 3 wire + Gnd:
55 A Peak @ 264 V L-L
Input Option “C”: 1 phase, 2 wire + Gnd, Low line:
30 A Peak @ 132 V L-N
Input Option “C”: 1 phase, 2 wire + Gnd, High line:
55 A Peak @ 264 V L-N
Input
Option “D”, 3 phase, 3 wire + Gnd:
55 A Peak @ 456 VAC L-L
Input
Option “E”, 3 phase, 3 wire + Gnd:
55 A Peak @ 528 VAC L-L
Input
Frequency,
Nominal Rating 50 Hz, 60 Hz
Input
Frequency
Range 47 Hz- 63 Hz
Power
Factor
(9)
,
typical
a) 1-Ph: 0.98; active PFC
b) 3-Ph: 0.95 for C option, active PFC
c) 3-Ph: 0.95 for D and E options, active PFC
Hold-Up
Time
(9)
,
typical
≥10 ms
Isolation
Voltage 1500 VAC Input to Ground,
3000 VAC Input to Hazardous Secondary,
3000 VAC Input to Isolated SELV barriers
1)
In Single Phase the Low Line Range 90
– 132 V AC, operating ambient temperature of operation
to be limited to 40° C. Ensure the inlet wiring is capable of handling current up to 25 A to load up to
1800 W (600 W per Channel). If the unit is powered from the standard 15 A outlet, unit power to be
derated to 1200 W (400W Per Channel).
2)
In Single Phase High Line Range 180
– 264 V AC, operating ambient temperature to be limited to
40° C.
3)
Typical value at full load 1800 W output (600 W per channel) and nominal AC input voltage of
208VAC L-L at 50/60 Hz input frequency.
4)
Typical value at full load 1800 W output (600 W per channel) and nominal AC input voltage of
110VAC L-N at 50/60 Hz input frequency.
5)
Typical value at full load 1800 W output (600 W per channel) and nominal AC input voltage of
220VAC L-N at 50/60 Hz input frequency.
6)
Typical value at full load 1800 W output (600 W per channel) and nominal AC input voltage of
400VAC L-L at 50/60 Hz input frequency
7)
Typical value at full load 1800 W output (600 W per channel) and nominal AC input voltage of
480VAC L-L at 50/60 Hz input frequency.
8)
Not including EMI filter inrush less than 200us.
9)
Measured at full load at rated nominal AC input voltage of 208 VAC/ 400 VAC/ 480 VAC L-L for 3
phase input and 110 VAC/ 220 VAC L-N for single phase input.
10)
Contact to factory for high frequency operation for more details
1.2.8 Operational Characteristics
Parameter Characteristic