Asterion DC Multioutput ASA Series Operational Manual
M330516-01
3-35
parameter for adjustment, and the screen changes to the numeric keypad that allows
value entry; Refer to Figure 3-7.
Another way of entering the value is by scrolling to the parameter selection-field and
depressing with encoder switch, parameter selection- field active has its border highlighted
in bold when selected using the encoder switch; refer to Figure 3-6, current selection field
is selected by encoder switch and the border is highlighted in Bold lines. Upon selection
then user can continuously adjust the parameter value, up and down, as the encoder is
rotated, and the encoder switch is depressed again this will set the value on the parameter
field.
Figure 3-6: DASHBOARD Screen Current Selection-Field Active using Encoder
switch
3.3.3
Touch-Screen Numeric Keypad
The touch-screen has a keypad that allows numeric value entry; refer to
. After
scrolling through menus until a parameter selection-field box is highlighted (active),
tapping the selection-field selects it. Afterwards, the keypad screen will be displayed.
Tapping numerical value keys, the decimal point key, or the polarity key, selects them,
while the back-arrow key erases the last entry. To enter a negative value, first enter the
number then the minus sign. The selected values appear in the upper-left parameter
window, and the cursor moves to the next available position. Tapping the OK key enters
the value to have it take effect.
Figure 3-7: Touch-Screen Numeric Keypad
Functions that accept a numeric value require that the value is within the allowed range,
otherwise, an error will be generated, and the value will not be accepted.
