Asterion DC Multioutput ASA Series Operational Manual
M330516-01
2-14
Connector
Type
DC Output and
Remote Sense
Chassis connector header: Phoenix P/N 1720835; 6-position, compression
terminals;
Mating connector: Phoenix P/N 1777875; compression terminals; housing
retained to header with screws;
Wire stripping length: 10 mm (0.39”);
Tightening torque: 0.7 Nm, min (6.1 lb-in) to 0.8 Nm, max (7 lb-in);
Wire cross section: 0.2 mm
2
, min (24 AWG) to 6 mm
2
, max (10 AWG).
Refer to Phoenix P/N 1777875 manufacturer datasheet for the complete
specifications of the Mating Connector.
Table 2-7: DC Output and Remote Sense Connector Type
CAUTION!
The output DC connector provides two terminals each for positive and negative DC
outputs rated at 25A. Loads requiring more than 25A to use two wires from individual
output pins provided in the connector and connections to be made externally to the
load. Looping of the wires in the output connector would cause over heating of the
output terminals and would cause damage to the power supply.
CAUTION!
To prevent damage to the DC Output and Remote sense mating connector, follow
torque specifications, and, if a wire ferrule is used, ensure that it is properly sized
and that it has been crimped with the appropriate ferrule crimping tool.
Figure 2-8: DC Output and Remotes Sense Connector wiring
