Asterion DC Multioutput ASA Series Operational Manual
M330516-01
3-74
Figure 3-94: Warning screen 2
Entry
Description
CH Ref
Allows to
select Reference channel to be turned ON initially. Button 1
selects channel 1 as reference channel, button 2 selects channel 2 as
reference channel and button 3 selects channel 3 as reference channel.
Any one of the channels could be selected as reference channel.
Select Channel
Allows to
select the output channels to be turned ON in a sequence,
button 1 will Select Channel 1 output, button 2 will Select Channel 2
output and button 3 will Select Channel 3. Minimum two channel must be
selected among the three channels.
Apply
Applies the Configured CH Ref and Select Channels settings to the
supply.
3.4.8.4
C
ONFIGURE
D
ELAY
Configure Delay screen allows the user to configure the delay time required to enable
or disable the output of each channel. Refer Figure 3-96.
The minimum programmable delay is 30ms and maximum programmable delay is
999000ms.
Example:
CH Ref is 1, CH2 delay = 40ms and CH3 delay = 100ms
if the Output state is selected ON from the Output Settings screen (refer Figure 3-90),
Channel 1 output will get turned ON initially without any delay,
Channel 2 output will get turned ON with given 40ms delay time,
Channel 3 output will get turned ON with given 100ms delay time; Refer Figure 3-95.
