MAWA-050A
4. Explanation of Screens
4-4
(j) Error
History
Used to go to the Error history screen.
(k) Start mode display
The currently selected start mode “Touch Start” or “HV. Start” is displayed. This is
displayed in the upper part of each screen.
Remarks
When the password is made effective, the Password input screen is displayed by pressing the
yellow switch.
Password input screen
The Password input screen is display by pressing the switch which is used to go to the screen of
(Refer to “4. (1).”). After the registered password is input, the operator can go to the
required screen.
If the screen of
is displayed by inputting the password after the power supply is turned on,
the Password input screen will not be displayed in going to the screen of
after that. It is
possible to go to the screen without the password.
If “Enter” is pressed or the power supply is turned on again on the Password setting screen
(Refer to 4. (17).), the Password input screen can be displayed again in going to the screen of
.
(a) Password input area
The ten-key pad is displayed by touching this area. Then, input the password.
(b) Enter
The password registered in the main unit is verified by pressing this switch after
entering the password. When the verification result is correct, it is possible to go to
the requested screen. If the result is incorrect, “Password is different.” is displayed
and the operator cannot go to another screen.
Remarks
If the registered password is forgotten, make contact with us for information.
