MAWA-050A
2. Installation and Connections
2-1
2.
Installation and Connections
WARNING
When transporting the welding power supply with hands, hold the bottom surface. If the
welding power supply is carried by holding such a projection as the terminal cover and the
projection is damaged, causing the welding power supply to fall down, the foots may be
collapsed by it.
(1) Installing
Conditions
IMPORTANT
For installing the welding power supply, do not install it in the following places.
- Where there is a high noise generating source in the neighborhood
- Where chemicals are handled
- Where it is very dusty
- Where there are lots of vibrations and shocks
Install the welding power supply in a solid place and operate it in a horizontal status to the
ground. If the equipment is used in an inclined or fallen-down status, this may result in a
failure.
When installing the equipment near a wall, keep a certain distance from the wall. If this
distance is short, the internal temperature will rise and easily cause “E03 Overheat error.”
Wall
Wall
Wall
Wall
100 mm
or more
150 mm or more
150 mm or more
Exhaust
Exhaust
Top surface of the
welding power supply
Air
inhalation
200 mm or more
