Chapter
9
63
ML-9011A
9.5 Commands
When the specified part file has not been registered, the part No. is not changed and NAK is
replied.
When the two or more numbers are registered for a part filename, the number detected first is
replied.
(24) GRS (Part binary registration)
Register the part by designating the part No. and part filename.
t0: Part number (30001 - 32000)
t1: Part filename (extension is ".SMB")
t2: Part itself (binary string)
(25) SVL (Layout save to memory card)
Save the layout file developed on RAM to the memory card.
(26) SVG (Part save to memory card)
Save the part data developed on RAM to the memory card.
Part No. is changed by transferring layout or variable data from LMDraw6. Check the
part No. with this command immediately before marking, and set the got part No. with
MRW or VDW command.
Example
When registering a part as "BUHIN.SMB" with Part No. 30001
Computer ->
Marker
: GRS30001,BUHIN.SMB,204E000... (binary string)
[When using a part file registered with GRS command on LMDraw6]
When using a part file registered with GRS command on LMDraw6, you need to apply the following
procedures.
1 Save the part file to the memory card with SVG command.
2 Take LMDraw6 offline, then take it online again. (When LMDraw6 is already in offline, take it
online.)
Computer ->
Marker
: SVL
･
When a part has been registered on the specified number, the layout is
overwritten.
･
Use the binary file created with LMDraw6 for the part itself.
･
The correctness of binary data for part itself is not checked.
･
When the binary data for the layout itself is incorrect, the data error occurs at
marking start.
･
When the binary data for the part itself is incorrect, the data error occurs at
marking start.
･
Since amount of communication data is limited, up to 2 KB of data can be
registered.
･
Part data is registered on RAM only, not saved to the memory card.
Neglecting to do this will cause the following to occur:
･
When you have transferred layouts, variable data, or barcodes (Code 39, ITF,
DataMatrix, or QR codes) from LMDraw6, part files registered with GRS
commands will be deleted.