Chapter
9
61
ML-9011A
9.5 Commands
Only one part can be set in
the marker as “Default” on the barcode setting dialog box for L
shape symbol, cell and margin parts, respectively. Therefore, the part to switch needs to be
transferred to the marker in advance as follows.
1 Import an image file.
2 Set a part in the color palette setting screen.
3 Save the layout which the image file is imported in, and transfer it.
4 You can call up the part set in step 2.
[How to get the part No. by filename]
Get the part No. by part filename with GNS command.
t0: Part filename (Designates the whole registered filename that includes the extension
“.SMB.”
)
When the specified part file has not been registered, the part No. is not changed and NAK is
replied. When the two or more numbers are registered for a part filename, the number detected
first is replied.
(19) ARD (Matrix skip) NOTE: Cannot be executed during marking.
Skip a part of matrix.
The matrix skipped by this function is returned after marked. This function can be operated
separately from the matrix delete function of LMDraw6.
■
Write (ARDnn,mm...)
nn: Layout number
mm: Specified matrix number
(20) ARI (Matrix skip command cancel) NOTE: Cannot be executed during marking.
The matrix skipped by ARD command cannot be returned unless marking is performed.
This function cancels the skip designated by ARD command.
t0:Layout number (1 - 1023)
The matrix skip command for the layout number designated by t0 is canceled.
･
The number of registrable parts is up to 16 due to limit of the BMP color palette.
･
When this function is used, the BMP marking function cannot be used. For how to
import image files, refer to the Operations manual.
Computer -> Marker
: GNS t0
Example
When getting the part No. of “
GNSKURO-1.SMB
.”
Computer -> Marker
: GNSKURO-1.SMB
Marker -> Computer
: 20002
Example
When deleting matrix indexes 1,4,5,6,7,100,120,121 of Layout No. 2
Computer ->
Marker
: ARD2,1,4-7,100,120,121: ARD2,1,4-7,100,121,121
When matrix indexes are continuing, use minus (0x2D) instead of comma (0x2c).
Specify smaller numbers first.
Computer ->
Marker
: ARI t0