Chapter
9
59
ML-9011A
9.5 Commands
■
Write array data (MRW t0,1,5,t3,t4,t5,t6)
t0:
Layout number
t3:
Matrix number (0 - 9999)
t4:
X offset (unit:
µ
m)
t5:
Y offset (unit:
µ
m)
t6:
Axis rotation angle (unit: 0.000001
°
) When -180.000000 is specified, the matrix No. is
not marked.
22 and after String (can be used with variable data)
･
Reading/writing data of the LD current by MRR/MRW command is not supported.
･
Do not input data in spare parameters. Marking is not performed normally.
･
Do not input a parameter out of the marking area specification of the lens used.
Marking is not performed normally. (Refer to 8.2 "Marking Area Specifications" (p.
42).)
･
Skip parameters that won’t be set.
･
Refer to the table below for the available string types for items 22 and after (string).
･
The layout must be rearranged in a mode that allows data to be read and written
line by line.
0
1st Standard
8
DataMatrix
1
2nd Standard
9
QR Code
2
Parts
10
Serial Code 39 (optional)
3
Cursive Text
11
Serial ITF (optional)
4
Variable
12
Serial DataMatrix (optional)
5
Serial
13
Serial QR Code (optional)
6
Code 39
15
Code 128
7
Barcode ITF
16
Serial Code 128 (optional)
Specify the number when the string type is 2, 4, 5, 10, 11, 12, or 13.
Example
When changing X offset of Layout No. 1 and Matrix No. 10 to 20.000 mm; Y offset to 20.000 mm; Axis
rotation angle to 0.000000
°
.
Computer ->
Marker
: MRW1, 1, 5, 10, 20000, 200000, 0
The matrix No. indicates the marking order of matrix, and sequence numbers 0 to
9999 are assigned. When creating a matrix with LMDraw6, the matrix No. is different
if the matrix is created with "Row priority" or "Column priority."
<Row priority>
<Column priority>
Sequence
Data Content
Linear Layout
Arcing Layout