Agilent Technologies 8360B, User Manual, Page: 48 / 496

Select
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Power Sweep (asterisk on).
Press 4 SINGLE 5.
The sw ept signal generator p erforms a p o w er sw eep b eginning at
020 dBm and ending at +5 dBm. The p o w er meter indicates
+25 dB.
P o w er Slope Operation
This function allo ws for comp ensation of high frequency system or
cable losses b y linearly increasing the p o w er output as the frequency
increases. F or this example, refer to the \Men u Map" section.
Press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Power Slope , the active en try area displays:
--> RF SLOPE: X.XX dB/GHz , where X is a n umeric v alue.
P o w er slop e is no w active, notice that an asterisk is next to the k ey
lab el.
Use the en try k eys, rotary knob, or arrow k eys to en ter a v alue for
the linear slop e.
Press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Power Slope again to turn this feature o.
Figure 1-10. P o w er Sw eep and P o w er Slope Operation
P o w er Sw eep P o w er Slop e
1. Press PO WER 4
MENU
5 . 1. Press PO WER 4
MENU
5 .
2. Select
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Power Sweep . 2. Select
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Power Slope .
3. En ter a v alue. 3. En ter a v alue.
4. Press terminator k ey . 4. Press terminator k ey .
Getting Started Basic 1-19