Agilent Technologies 8360B, User Manual, Page: 446 / 496

Rack Flange Kit for
Sw ept Signal
Generators with
Handles Remo v ed
(Option 908)
Option 908 sw ept signal generators are supplied with rac k anges and
the necessary hardw are to install them on the sw ept signal generator
after removing the instrumen t handles. The following table itemizes
the parts in this kit.
T able 3-5.
Rack Flange Kit for Sw ept Signal Generators with
Handles Remo v ed Contents
Quan tit y Description
2 Rac k Moun t Flanges
8 Screws
CA UTION
V en tilation Requiremen ts: When installing the instrumen t in a
cabinet, the con v ection in to and out of the instrumen t m ust not b e
restricted. The ambien t temp erature (outside the cabinet) m ust b e
less than the maxim um op erating temp erature of the instrumen t
b y 4 C for ev ery 100 w atts dissipated in the cabinet. If the total
p o w er dissipated in the cabinet is greater than 800 w atts, then forced
con v ection m ust b e used.
Installation 3-13