Agilent Technologies 8360B, User Manual, Page: 149 / 496

2
Operating and Programming Reference
How T o Use This
Chapter
The op erating and programming functions of the syn thesizer are
listed in alphab etical order. Eac h en try has a complete description,
complete programming co des, and a cross reference to the main
function group and resp ectiv e men u map. Cross references to
op erating and programming examples lo cated in Chapter 1, \Getting
Started", are also given.
Error messages, instrumen t sp ecications, and men u maps are
lo cated in their o wn tabb ed sections. Men u maps can b e folded out
and viewed at the same time as the alphab etical en try . See the
illustration b elow.
F or op erator's service information, see the Chapter 4, \Op erator's
Chec k and Routine Maintenance". The op erator accessible 4 SERVICE 5
softkeys are describ ed in that c hapter. Complete 4 SERVICE 5 men u
and softkey information is pro vided in the A gilent T e chnolo gies
8360 B-Series Swept Signal Gener ator/ 8360 L-Series Swept CW
Gener ator Servic e Guide .
Programming Language
Comparison
T able 3-9 cross-references the actions that the instrumen t can
p erform with the programming commands that will prompt those
actions.
Operating and Programming Reference 2-1