Agilent Technologies 8360B, User Manual, Page: 346 / 496

SCPI COMMAND SUMMARY
LIST:MODE LIST:TRIGger:SOURce Ho w the list is pla y ed back.
A UTO IMMediate Each new frequency p oint is
stepp ed to automatically ,
after w aiting the sp ecied
D WELl time.
A UTO BUS W ait for a <GET> or *TR G
over the GPIB b efore
adv ancing to the next
frequency in the list.
A UTO EXT ernal W ait for a signal to b e
received on the external
input b efore adv ancing to
the next frequency in the
list.
MANual Don't care Only the list p oint
sp ecied by LIST:MANual
is play ed back.
*RST state is AUTO .
LIST[:POWer]:CORRection {<num>[DB]|MAXimum|MINimum}1*801
LIST[:POWer]:CORRection?
Sets and queries the list of correction lev els that corresp ond to eac h
of the frequencies en tered using the LIST:FREQ command. The
attenuator is not allo w ed to c hange during the list execution. The
n um b er of parameters can b e from 1 to 801.
After *RST, the v alue is 0.
LIST[:POWer]:CORRection:POINts? [MAXimum|MINimum]
Returns the n um b er of correction p oints that ha v e b een en tered in to
the list array . After *RST returns a 1.
LIST:TRIGger:SOURce IMMediate|BUS|EXTernal
LIST:TRIGger:SOURce?
Sets and queries the list p oint-to-p oint trigger source when in the
automatic list mo de. See LIST:MODE and INIT:CONT for more details.
*RST state is IMMediate .
MARKer[n]:AMPLitude[:STATe] ON|OFF|1|0
MARKer[n]:AMPLitude[:STATe]?
Sets and queries the amplitude marker on/o switch. While [n] may
b e used, there is really only a single switch for all the markers.
*RST v alue is OFF .
MARKer[n]:AMPLitude:VALue <num>[DB]|MAXimum|MINimum
MARKer[n]:AMPLitude:VALue? [MAXimum|MINimum]
Sets and queries the v alue of the amplitude marker. While [n] may
Operating and Programming Reference S-39