Agilent Technologies 8360B, User Manual, Page: 276 / 496

NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Module Menu
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Module Menu
Function Group
4
ALC
5
Menu Map
1
Description
This softkey accesses the source mo dule selection softkeys.
Millimeter-wa v e source mo dules can b e connected to the sw ept signal
generator source mo dule in terface connectors (there is one eac h
on the fron t and rear panels). These softkeys give y ou the option
of letting the sw ept signal generator automatically lo ok at b oth
connectors for source mo dules or telling the sw ept signal generator to
lo ok only at the fron t or at the rear connector. Y ou can also turn o
mo dule sensing completely .
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Module Select AUTO
Sets the sw ept signal generator to
automatic selection of the source
mo dule.
(Selects the fron t connector if source
mo dules are presen t at b oth fron t and
rear connectors.) This is the default
after preset.
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Module Select Front
Sets the sw ept signal generator to select
the source mo dule connected to the fron t
panel source mo dule in terface connector.
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Module Select Rear
Sets the sw ept signal generator to select
the source mo dule connected to the rear
panel source mo dule in terface connector.
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Module Select None
Disables source mo dule sensing.
Programming Codes
SCPI: NONE
Analyzer: NONE
See Also
Softkeys listed ab o v e.
Operating and Programming Reference M-23