Agilent Technologies 8360B, User Manual, Page: 335 / 496

SCPI COMMAND SUMMARY
If this is ON , eac h time a frequency or p o w er is c hanged,
CALibration:AM[:EXECute] is attempted.
CALibration:AM[:EXECute]
When AM is on and the sw ept signal generator is in the CW or
man ual mo de, the sw ept signal generator p erforms a mo dulator
calibration as long as p o w er sw eep is not active.
CALibration:PEAKing:AUTO ON|OFF|1|0
CALibration:PEAKing:AUTO?
Sets and queries the automatic p eaking function. If AUTO is ON , then
a p eak is done at regular in terv als automatically . After *RST, the
setting is OFF .
CALibration:PEAKing[:EXECute]
P eaks the SYTM.
CALibration:PMETer:DETector:INITiate? IDETector|DIODe
Initiates the sp ecied calibration. These calibrations require the use
of an external p o w er measuremen t. Once initiated, the sw ept signal
generator sets up for the rst p oint to b e measured, and resp onds to
the query with the frequency at whic h the p o w er is to b e measured.
The parameters mean:
IDETector Initiates a calibration of the in ternal detector logger
breakp oints and osets.
DIODe Initiates a calibration of an external detector's logger
breakp oints and osets.
CALibration:PMETer:DETector:NEXT? <num>[lvl suffix]
The parameter is the measured p o w er that is curren tly pro duced b y
the sw ept signal generator. Y ou m ust supply this parameter after
measuring the p o w er using an external p o w er meter. The query
resp onse is issued after the sw ept signal generator pro cesses the
supplied parameter and settles on the next p oint to b e measured.
The query resp onse is:
>0 The frequency [in Hz] that is curren tly pro duced.
0 The calibration is complete.
<0 An error has o ccurred and the calibration is ab orted.
CALibration:PMETer:FLATness:INITiate?
USER|DIODe|PMETer|MMHead
Initiates the sp ecied calibration. These calibrations require the use
of an external p o w er measuremen t. Once initiated, the sw ept signal
generator sets up for the rst p oint to b e measured, and resp onds to
the query with the frequency at whic h the p o w er is to b e measured.
The parameters mean :
USER Initiates a calibration at all of the user atness p oints.
S-28 Operating and Programming Reference