Agilent Technologies 8360B, User Manual, Page: 443 / 496

Chassis Kits
Rack Mount Slide Kit
(Option 806)
Option 806 sw ept signal generators are supplied with rac k moun t
slides and the necessary hardw are to install them on the sw ept signal
generator. The follo wing table itemizes the parts in this kit.
T able 3-4. Rack Mount Slide Kit Contents
Quan tit y Description
Rac k Moun t Kit (Includes the following parts)
2 Rac k Moun t Flanges
8 Screws
Slide Kit (Includes the following parts)
2 Slide Assem blies
4 Screws (Inner Slide Assem bly)
8 Screws (Outer Slide Assem bly)
8 Nuts (Outer Slide Assem bly)
Slide Adapter Kit (NON-HP , includes the follo wing parts)
4 Adapter Brac k ets
4 Adapter Bar
8 Screws (Brac k et to Bar)
8 Nuts (Brac k et to Slide Assem bly)
CA UTION
V en tilation Requiremen ts: When installing the instrumen t in a
cabinet, the con v ection in to and out of the instrumen t m ust not b e
restricted. The ambien t temp erature (outside the cabinet) m ust b e
less than the maxim um op erating temp erature of the instrumen t
b y 4 C for ev ery 100 w atts dissipated in the cabinet. If the total
p o w er dissipated in the cabinet is greater than 800 w atts, then forced
con v ection m ust b e used.
3-10 Installation