Power Quality Analyzer Model 8335
77
Item
Function
1
Instantaneous value cursor; change values with the cursor using the
◄
and
►
buttons
2
Peak factor for each curve
3
Instantaneous value of the signals at the intersection of the cursor and the graphs
t:
time relative to the start of the period (expressed in milliseconds)
A1:
instantaneous current of phase 1
A2:
instantaneous current of phase 2
A3:
instantaneous current of phase 3
Note:
L1, L2 and L3 display the peak factors of the current and of the voltage
respectively for phases 1, 2 and 3.
5.3.4 Measurement of Min, Max, Average, Voltage and
Current Values
This sub-menu displays the RMS, maximum, minimum and average values for
voltage and current, together with those for the instantaneous positive and nega-
tive voltage and current peaks.
NOTE:
The display screen varies depending on which value is selected.
3U:
Displays the one-second mean and half-cycle maximum and minimum RMS
values and the instantaneous positive and negative phase-to-phase voltage peaks.
4V:
Displays the one-second mean and half-cycle maximum and minimum RMS
values and the instantaneous positive and negative peaks of the phase-to-neutral
voltages and of the neutral.
4A:
Displays the one-second mean and half-cycle maximum and minimum RMS
values and the positive and negative instantaneous peak values of the phase and
neutral currents.
L1/L2/L3:
Displays the one-second mean and half-cycle maximum and minimum
RMS values and the instantaneous positive and negative peaks of the phase-to-
neutral voltage and of the current of phase 1.
N:
Displays the RMS values and the positive and negative instantaneous peaks of
the neutral relative to earth.
Shop for AEMC products online at:
1.877.766.5412
www.
PowerMeterStore
.ca
