Power Quality Analyzer Model 8335
97
6.5.1 Setup
Figure 6-6
• Reactive Values Calculation:
With or without harmonics. Applies to VAR
calculation.
• Nominal Frequency:
50 or 60Hz. This parameter determines the correction
coefficients used for calculating power and energy.
• Current Sensor:
MN93, MN193, SR193, MR193, A193, SL261 AmpFlex
®
,
MiniFlex
®
or ADA Adapter (used to accept probes with other ratios or a direct
1 Amp or 5 Amp input)
• Connection Type:
Single-Phase, Two-Phase (Split Phase), 3-Phase 3 wire
or 3-Phase 5 wire.
• Set Instrument’s Clock:
Resets the time and date on the PowerPad
®
to that
of the computer or a desired setting.
• Voltage Transformer Ratio:
Sets the scale for voltage measurement in
cases where measurements are on the secondary side of a transformer and
the primary value needs to be displayed.
Shop for AEMC products online at:
1.877.766.5412
www.
PowerMeterStore
.ca
