84
Power Quality Analyzer Model 8335
5.5 Trend Mode
5.5.1 Programming and Starting a Recording
NOTE:
The ON/OFF light will blink when the recording is in progress.
When the recording is done, the ON/OFF light will turn off. You will need to
press it again to restart the instrument.
This mode enables all the parameters previously configured in the Configuration
mode
to be recorded (see § 4.3).
1. Press the Trend mode button -
.
Figure 5-17
1. Select the Configuration that was previously set-up (see § 4.3) by using the ▲
or ▼
button to highlight
Set-up
, then press the button.
2. Use the
▲ or ▼ button to choose Configuration 1, 2 3 or 4, then press
.
3. Select the Start field using the ▼
button. Press to select the date and time
field, then use the appropriate arrow buttons to change the date and time.
Press
when finished.
4. Using the same method as steps 1, 2 and 3, use the arrow buttons and the
button to change the values for Stop, Period and Name.
5. Press the
OK
icon’s yellow button to begin recording between your specified
start and end times. The
OK
icon disappears and the icon
appears.
Shop for AEMC products online at:
1.877.766.5412
www.
PowerMeterStore
.ca
