108
Power Quality Analyzer Model 8335
•
From the
“Recorded Data”
window it is possible to delete files stored on the
PowerPad
®
using the
“Delete”
button
•
The
“Download All Recorded Data”
button allows the user to download
and save all the files on the PowerPad
®
for later viewing and analysis.
•
Recorded data can also be found from the Instrument tree view. Expand the
sections under
“Recorded Data from the Instrument”
then click on a line
that describes the desired recorded data. It will bring up a window with a
graph of the data.
Recordings:
The Recording tab displays a list of recordings within the PowerPad
®
.
These recordings can be selected and downloaded to a database.
Photographs:
The Photographs tab displays a list of photographs (snapshots), with the date and
time, taken when the camera button was pressed.
When
“View”
is selected, it shows the waveforms, power data and Bitmap image
of the PowerPad
®
screen from the time the camera button was pressed.
Snapshots can only be initiated using the camera button on the Power-
Pad
®
itself, not by DataView
®
.
Alarms:
The Alarms tab displays the alarm search that was recorded to the PowerPad
®
.
Details on the alarm search are available by clicking on the desired alarm set,
which opens up an alarm window with the searches details. Alarm search data can
be selected and downloaded to a Spreadsheet or a DataView
®
Report by clicking
the corresponding buttons.
Transients:
The Transients tab displays transients stored on the PowerPad
®
. It shows the
number and name of the recording, and the time it began and ended. The selected
transient(s) can either be downloaded or deleted.
The downloaded result contains many waveforms. Use the controls
“><”
and
“<>”
located at the lower right corner of the window, to zoom in or out of the data.
These controls are available in every graph from recorded data.
There is also a checkbox,
“View As List”
, which can be used to show the value
of every datapoint.
Shop for AEMC products online at:
1.877.766.5412
www.
PowerMeterStore
.ca