Power Quality Analyzer Model 8335
103
6.5.6 Inrush
The Inrush tab shows the dialog box used to configure the parameters for an
Inrush search.
Figure 6-11
1. Click the check box next to
Schedule Inrush Search
to activate the function.
2. Set a time and date for the search to begin.
3. Assign a
Current Threshold
in Amps, to trigger the inrush recording.
4. Select the
Channel
to run the Inrush search on. The search can be performed
on one of the three current channels (A1, A2, A3) or all three (3A).
5. Select a
Hysteresis
percentage.
Shop for AEMC products online at:
1.877.766.5412
www.
PowerMeterStore
.ca
