AEMC 8335 Power Pad User Manual Download Page 85

Page: 85 / 136

Power Quality Analyzer Model 8335

5.4.4 Displaying an Alarm Log

Press the

icon’s yellow button to view the alarm log. The log can contain a

maximum of 10,920 alarms.

NOTE:

The type of connection selected in the configuration mode

does not affect the possibilities of alarm filter choice and monitored
parameter. Users are responsible for these choices.

Figure 5-34

Item

Function

Alarm date and time

Alarm filter

Monitored parameter (Vrms, etc.)

Amplitude (min or max)

Alarm duration

5.4.5 Deleting an Alarm Log

1. Press the

icon’s yellow button

2. Select the alarm to be deleted using the

▲ or ▼

button, then press the

button to confirm deletion.

To leave this screen without deleting any alarm, press the

button.

Shop for AEMC products online at:

1.877.766.5412

www.

PowerMeterStore

.ca

Summary of Contents for 8335 Power Pad









































































































































Search results

Summary of Contents for 8335 Power Pad

Reviews:

Related manuals for 8335 Power Pad

Brands by name

Popular brands

AEMC 8335 Power Pad, User Manual

Search results

Summary of Contents for 8335 Power Pad

Reviews:

Related manuals for 8335 Power Pad

Brands by name

Popular brands