50
Power Quality Analyzer Model 8335
CHAPTER 5
DISPLAY MODES
To select parameters in all modes, use the
◄ ►▲▼ buttons to move to the desired
parameter and use the
button to confirm selections.
5.1 Waveform Capture Mode
Press the Waveform Display mode
button. The
Waveform Capture
screen
appears with two submenus.
Figure 5-1
Select either the
Transient mode (§ 5.1.1)
or the
Inrush Current mode (§ 5.1.2)
using the
▲ and ▼ buttons, then confirm with
.
To return to the
Waveform Capture
screen, press
.
5.1.1 Transient Mode
This mode enables transients to be recorded, the list of recorded transients to
be viewed, and if necessary, deleted. All tracks are stored in memory for each
transient (regardless of the connection configuration). You can record up to 210
transients.
NOTE:
When the Transient mode is selected, the display screen will depend on
the following conditions:
if …
then …
no record has been made
the
Detection Schedule
screen is displayed
transients have been recorded
the
Recording List
screen is displayed
Shop for AEMC products online at:
1.877.766.5412
www.
PowerMeterStore
.ca
