88
Power Quality Analyzer Model 8335
5.7 Snapshot Mode
This button allows 50 snapshots to be saved for future recall and evaluation.
• Press the
button (for about 3s) to capture the current display.
• The
icon is displayed in the top left corner as soon as the operation
is successful.
• This icon is replaced by
if there is no space left in the memory to
record the display.
• The snapshot will record all measurements present at the input of the
meter when you press the
button.
These screens can be downloaded to a computer using DataView
®
5.7.1 Opening a Previously Saved Snapshot
•
A
short press
(about 1s) on the
button gives access to the menu of
snapshots that have been saved.
•
The small icon to the left of each snapshot (date and time) tells you what type of
data was stored.
Figure 5-37
• Use the ▲ or ▼
buttons to select the snapshot.
• To display the snapshot, press the
button, then the button.
• After reviewing the snapshot, press the
button again to return to the list of
saved snapshots.
The various storage spaces of the PowerPad
®
are of a fixed size and are
completely independent. There are four memory spaces available (alarms,
snapshot, transients and recordings).
Shop for AEMC products online at:
1.877.766.5412
www.
PowerMeterStore
.ca
